meet i-Spin™ XL, our Spinning all-in-one car seat.
spins for easy in and out, rearward facing from birth, harness to 105 cm, then a booster all the way to 150 cm.
at a glance
| installation | harness mode with ISOFIX and load leg, booster mode with the car's seat belt, ISOFIX optional, base included |
| usage | car seat |
| suitable for | rearward facing from birth, 40 to 105 cm, forward facing from 15 months, 76 to 105 cm, with the five point harness, then 100 to 150 cm as a booster |
| manual | available to download below |
| video | 1 guide |
fitting in your car
i-Spin™ XL installs with harness mode with ISOFIX and load leg, booster mode with the car's seat belt, ISOFIX optional, base included, as set out in the instruction manual. The step by step for your exact car lives in the manual below. The check that matters: once fitted, give the seat a firm wiggle where it meets the car. A correct fit stays put. If anything moves more than a little, take it out and start again... it takes a minute and it is always worth it.
using i-Spin™ XL day to day
Buckle up the same way every time: straps lying flat and snug, nothing twisted, and the headrest climbing as your child grows. The instruction manual shows every adjustment, so the fit stays right, ride after ride.
washing and caring for i-Spin™ XL
Crumbs and spills happen, that is what little ones are for. The wash label stitched into the fabric and the care section of the manual tell you what comes off and how it washes best, and the frame just wants a wipe with a damp cloth and mild soap. One rule above all: if i-Spin™ XL has been through an accident, retire it and replace it, safety first.